Vandalism-safe gearing with self-closing feature for PASS 838V

Thanks to a sophisticated mechanism the barrier automatically protects against a violent attempt to force the boom. For maximum safety, such an attempt gets also logged in the memory cycle.

Gearing running in an oil bath for continuous operation (100% duty cycle)

The robust oil-immersed special gear is suitable for up to 2000 cycles per day and thus ensures a smooth operation for many years.

High speed opening, also barriers to 6 meters boom length

Thanks to the special gear the PASS 838 opens and closes very quickly (the 3 m boom moves in 1.5 seconds) - especially with longer booms (with a length of up to 6 m). This allows all entries and passages to be automated quickly and reliably.

Comfortable emergency release for worst case

Because of an intelligent mechanism, the bar - in case of a power failure - can be unlocked easily and without effort from the outside.

Integrated Plug&Play control board in housing for maximum ease of use

An innovative control unit of  last generation is located into the barrier housing. Terminals, fuses and programming buttons are accessible without opening the control box and are always protected from rain and from mechanical influences. The main focus of all our controllers is the easy setting of all functional processes. All parameters as impulse /automatic mode, partial opening, soft stop and much more can be programmed in a very user friendly and time saving way by means of four buttons, a large backlit two-line LCD display and a plain text menu guidance.

To find out more information concerning our control? click here to read more!

Standard soft stop for smooth movements

The barrier stops in both directions at reduced speed. In addition to a harmonic motion also the entire mechanism of the barrier is preserved.

Direct connection of 8,2kΩ safety contact edges for more cost efficiency

As with all tousek products highest security and reasonable costs are not a contradiction. Therefore, the beam bottom edge is monitored as standard in the PASS 838 series. Surprises due to higher costs for additional processing electronics, can be definitely ruled out..

Integrated connection slot for induction loop detector

All barriers from the PASS 838 series have a slot for an induction loop detector. This allows even the most demanding operating logics - such as detection of directions - to be easily implemented.

High-grade steel housing, painted red optionally available in stainless steel

Any RAL colour is optionally available.

Flexible

The barrier door can be locked with a commercial standard cylinder and is therefore easy to integrate into an existing key system.

Resistant

The multi-layer coating consisting of phosphating, two-component primer and two component structure coating, ensures color stability for many years.

Stable

The robust special gear is designed for up to 2000 cycles per day, thus ensuring a smooth operation for many years.

Maintenance control

The integrated maintenance control gives timely information about upcoming service works..

Optional Master-Slave or traffic light function

If two barriers are necessary, the PASS 838 series can be equipped with a master-slave function. However, if a one-way or two-way traffic control is desired, this can be easily implemented with the optional traffic control

Automatic Reversal-System ARS for maximum safety

Thanks to the integrated speed sensor, the sensor has an automatic reversing system - ARS. If the boom hits an obstacle, the barrier stops immediately and automatically moves up. This is for maximum safety.

Self-learning end positions without limit switches for easier setup

All barriers of series 838 PASS learn during the installation automatically the end positions. Additionally, you can finely adjust the programmed positions or adapt them to your needs. Mechanical limits that may be defective or freeze in winter, are completely eliminated.